Railing Tools
Revised 11/13/02
#
10" Dia. x 5/8" arbor 80 tooth Triple Chip blade for aluminum.
Makes cutting aluminum a breeze when used with our lube stick.
1
2
3
4
5
6
| If small photo has a blue border you can to go to a larger photo by clicking on it | # | Photos |
|---|---|---|
| This is the special 10" saw blade we have for our customers. 10" Dia. x 5/8" arbor 80 tooth Triple Chip blade for aluminum. Makes cutting aluminum a breeze when used with our lube stick. | 1 |
|
| This is the lube we offer for use on your aluminum cutting saw blades. | 2 |
|
| This shows a cable cutting tool with a special cutting head to cut the cable without spreading the individual strands such as a bolt cutter might do with a flat jaw. The cable must be kept in a round form so it can easily fit into the stainless fittings we offer for either factory or field installation. This size will cut 1/8" and 3/16" stainless cable. | 3 |
|
| This is the Swaging Tool we offer. There is one with two die holes for a "C" and "G" size fittings which are the 1/8" and 3/16" and if you want to upgrade, one with 4 dies allowing use on other cables and fittings. | 4 |
|
| This is the tool we use to check cable tension. It is normally used for rigging sail boats, but we calibrated it for cable when used in railings. | 5 |
|
| This photo will link you to our "Rental Tool Group". | 6 |
|
| We currently have two special bits to offer. One for wood and one for metal. | 6 | Drill Bits |